Go Local Guru Web Search

Search results

1. Results from the Go Local Guru Content Network

2. Submittals (construction) - Wikipedia

   en.wikipedia.org/wiki/Submittals_(construction)

   Submittals in construction management can include: shop drawings, material data, samples, and product data. Submittals are required primarily for the architect and engineer to verify that the correct products will be installed on the project.

3. 16 Divisions - Wikipedia

   en.wikipedia.org/wiki/16_Divisions

   The 16 Divisions of construction, as defined by the Construction Specifications Institute (CSI)'s MasterFormat, is the most widely used standard for organizing specifications and other written information for commercial and institutional building projects in the U.S. and Canada.

4. Construction estimating software - Wikipedia

   en.wikipedia.org/wiki/Construction_estimating...

   Construction cost estimating software is computer software designed for contractors to estimate construction costs for a specific project. A cost estimator will typically use estimating software to estimate their bid price for a project, which will ultimately become part of a resulting construction contract.

5. Fusion welding - Wikipedia

   en.wikipedia.org/wiki/Fusion_welding

   Arc welding joins two pieces of metal together by using an intermediate filler metal. The way this works is by completing an electrical circuit to create an electrical arc. This electrical arc is 6500 °F (3593 °C) in its center. This electrical arc is created at the tip of the filler metal.

6. Flashing (weatherproofing) - Wikipedia

   en.wikipedia.org/wiki/Flashing_(weatherproofing)

   Flashing may be exposed or concealed. Exposed flashing is usually of a sheet metal, while concealed flashing may be metal or a flexible, adhesive-backed material, particularly around wall penetrations such as window and door openings.

7. Concrete slab - Wikipedia

   en.wikipedia.org/wiki/Concrete_slab

   There are two common methods of filling - controlled fill and rolled fill. Controlled fill: Fill material is compacted in several layers by a vibrating plate or roller. Sand fills areas up to around 800 mm deep, and clay may be used to fill areas up to 400 mm deep.